Author Topic: Steel Frankenstein Electrodes / bolts to replace the ones on the Cinart Teves  (Read 5497 times)

westbatman

  • Corporal
  • ****
  • Posts: 315







Hey guys, I tried to mold and cast these in resin but my results were sub-par so I had them machined.

Measurements are:
Plain top electrode (left neck) is 3/4" high, base is 7/8", and body is 1/2" in diameter.

"Top hat" electrode (right neck) is 13/16" high, base is 7/8", body is 1/2" in diameter, and top is 5/8".

I have a Cineart vinyl bust that I turned into a full size figure and I wanted to have real metal neck electrodes so I had these made. These electrodes were machined from the vinyl version. I drilled a 5/32" hole directly in the center on the electrode impression on my Cineart vinyl version and simply screwed the new electrode in place, you'll see it fit PERFECTLY!

You'll notice in one of the photos I showed the Cineart electrodes behind the machined ones for comparison. If you want to bump up your 1:1 Frankenstein monster bust a notch these will do it. Get them while they last! These will also be on ebay.

Please PM me for price if interested.
« Last Edit: August 23, 2014, 06:27:36 PM by westbatman »

GMcKellar

  • New Recruit
  • *
  • Posts: 29
These are exactly what I have been looking for.  Unfortunately I have the larger resin version.  NUTS...no pun intended.  OK, it was intentional.
Any idea if you could make a set?  I can get the dimensions.


gracebuster

  • Sergeant Major
  • *****
  • *
  • Posts: 2278
Be careful, you don't REALLY want that monster to come to life!

They look great.

tidroplane

  • Sergeant
  • *****
  • Posts: 2950
Wow!! They look awesome!
Listen to them...Children of the night...What music they make!

poppydave

  • Specialist
  • ***
  • Posts: 165
    • http://s1173.photobucket.com
Let me tell you, those are the best I have ever seen.
Dave

GMcKellar

  • New Recruit
  • *
  • Posts: 29
They look fantastic.  I ordered two sets.  Can't wait.

westbatman

  • Corporal
  • ****
  • Posts: 315
Thanks guys, I am very pleased with these, wish I wold have done them sooner. All orders have been shipped, I hope you enjoy them.

Andy

Monsters For Sale

  • Sergeant
  • *****
  • Posts: 8264
  • Aged 10 - 1957

I got a pair of these - they really are gorgeous!

Highly recommended.
ADAM

westbatman

  • Corporal
  • ****
  • Posts: 315
Thanks guys, I'm glad you like them!

Andy

GMcKellar

  • New Recruit
  • *
  • Posts: 29
Got my two sets and they are fantastic.  I will post pics when they're added to the beast.

GMcKellar

  • New Recruit
  • *
  • Posts: 29
Re: Steel Frankenstein Electrodes / bolts to replace the ones on the Cinart Teves
« Reply #10 on: September 23, 2014, 10:02:11 AM »

Here is the new starboard side steel electrode on my Cine Art Frank, resin version.  These electrodes are really nice and add a great touch.
« Last Edit: September 23, 2014, 04:13:35 PM by GMcKellar »

Mord

  • Sergeant
  • *****
  • Posts: 19856
Re: Steel Frankenstein Electrodes / bolts to replace the ones on the Cinart Teves
« Reply #11 on: September 23, 2014, 01:49:47 PM »
 Now it looks perfect.

Relic

  • Corporal
  • ****
  • Posts: 459
Re: Steel Frankenstein Electrodes / bolts to replace the ones on the Cinart Teves
« Reply #12 on: September 25, 2014, 06:56:04 PM »
I just got my set today, and I am really pleased with them
Andy did a wonderful job recreating these, there's plenty attention to detail!

Mord

  • Sergeant
  • *****
  • Posts: 19856
Re: Steel Frankenstein Electrodes / bolts to replace the ones on the Cinart Teves
« Reply #13 on: September 25, 2014, 07:15:43 PM »
 I'm still amazed at how much of a difference these make to the final piece. What an improvement!

trekmakeup

  • Private First Class
  • **
  • Posts: 63
Hello, I would like to know how much your are selling the bolts for? I would like 2-3 sets as I have three heads I want to finish for my collection.
Thank you,
Jeff Lewis